Author Index

A

  • Abasi, s. mehdi Investigation on the Effect of Martensitic and Austenitic Structures on Two-Way Shape Memory Strain Value in Ni-Ti Alloys Trained under Bending [Volume 22, Issue 1, 2012]
  • Abbaszadeh, khodamorad Effect of Austempering Treatment on Microstructure and Mechanical Properties of D6AC Steel [Volume 22, Issue 2, 2012]
  • Abdous, hasan The Effect of Temperature and Time of Infiltration Process on the Wear esistance and Properties of WC/Cu Composite [Volume 22, Issue 1, 2012]
  • Aghajani, hosin Effect of Plasma Nitriding Temperature and Time on the Properties and Surface Morphology of H11 Hot Work Tool Steel [Volume 22, Issue 1, 2012]
  • Amirjan, mostafa The Effect of Temperature and Time of Infiltration Process on the Wear esistance and Properties of WC/Cu Composite [Volume 22, Issue 1, 2012]
  • Azodi, hamed Prediction of Forming Limit Diagrams (FLD) and Forming Limit Stress Diagrams (FLSD) for Aluminum Alloy 3105 with Finite Element Method using Ductile Fracture Criteria [Volume 22, Issue 1, 2012]

B

  • Boutorabi, mohamad ali Study of the Interface Reactions between Titanium Hydride Powder (TiH2) and Pure Aluminum Melt [Volume 22, Issue 1, 2012]
  • Brzegari, mojtaba Assessment of the Slope and Cross-Section of In-Gate on the Pressure and Flow Pattern Using Finite Volume Method [Volume 22, Issue 2, 2012]

D

  • Divandari, mehdi Study of the Interface Reactions between Titanium Hydride Powder (TiH2) and Pure Aluminum Melt [Volume 22, Issue 1, 2012]

G

  • Ghandehari, mohamad reza The Use of Eddy Current Nondestructive Test for the Quality Control of arburized Components [Volume 22, Issue 2, 2012]
  • Gorji, abdol hamid Prediction of Forming Limit Diagrams (FLD) and Forming Limit Stress Diagrams (FLSD) for Aluminum Alloy 3105 with Finite Element Method using Ductile Fracture Criteria [Volume 22, Issue 1, 2012]

H

  • Hamedani, mohamad taghi Study of the Influence of Chemical Composition on Miserite Formation in Glass Ceramic System SiO2-K2O-CaF2-CaO [Volume 22, Issue 2, 2012]
  • Hosseinipour, s. jamal Prediction of Forming Limit Diagrams (FLD) and Forming Limit Stress Diagrams (FLSD) for Aluminum Alloy 3105 with Finite Element Method using Ductile Fracture Criteria [Volume 22, Issue 1, 2012]

K

  • Karimi Zarchi, Hamid Reza Formation of Chromium Carbide Layer on Carburized AISI 1020 Steel by Thermal Reactive Diffusion (TRD) Technique and Evaluation of its Kinetics [Volume 22, Issue 1, 2012]
  • Kheirandish, shahram Effect of Austempering Treatment on Microstructure and Mechanical Properties of D6AC Steel [Volume 22, Issue 2, 2012]

M

  • Madanipour, hosin Effect of Plasma Nitriding Temperature and Time on the Properties and Surface Morphology of H11 Hot Work Tool Steel [Volume 22, Issue 1, 2012]
  • Marghussian, vahak Study of the Influence of Chemical Composition on Miserite Formation in Glass Ceramic System SiO2-K2O-CaF2-CaO [Volume 22, Issue 2, 2012]
  • Mirbagheri, S.mohamad hosin Assessment of the Slope and Cross-Section of In-Gate on the Pressure and Flow Pattern Using Finite Volume Method [Volume 22, Issue 2, 2012]
  • Momeni, hosin Effects of Nitrogen and Vacuum Atmospheres and Addition of Tin on the Densification of Al-Cu-Mg pre-alloyed Powder During Supersolidus Liquid-Phase Sintering [Volume 22, Issue 2, 2012]

N

  • Nekouee, khan ali Effect of Plasma Nitriding Temperature and Time on the Properties and Surface Morphology of H11 Hot Work Tool Steel [Volume 22, Issue 1, 2012]
  • Nemati, ziyarat ali Study of Corrosion Behavior of MgO-Cr2O3 Refractories under the Influence of Cement Clinker [Volume 22, Issue 1, 2012]

O

  • Otroj, sasan Study of Corrosion Behavior of MgO-Cr2O3 Refractories under the Influence of Cement Clinker [Volume 22, Issue 1, 2012]

R

  • Rasooli, ali Study of the Interface Reactions between Titanium Hydride Powder (TiH2) and Pure Aluminum Melt [Volume 22, Issue 1, 2012]
  • Rasti, javad Evaluation of Grain Size Distribution during Grain Growth in AISI 304H, 316L and 321 Austenitic Stainless Steels [Volume 22, Issue 2, 2012]
  • Razavi, S. hosin Effects of Nitrogen and Vacuum Atmospheres and Addition of Tin on the Densification of Al-Cu-Mg pre-alloyed Powder During Supersolidus Liquid-Phase Sintering [Volume 22, Issue 2, 2012]
  • Ronaghi, S. Amin The Study of Graphitization Process in Hypereutectoid Steel CK100 [Volume 22, Issue 2, 2012]

S

  • Safari, mehdi Prediction of Forming Limit Diagrams (FLD) and Forming Limit Stress Diagrams (FLSD) for Aluminum Alloy 3105 with Finite Element Method using Ductile Fracture Criteria [Volume 22, Issue 1, 2012]
  • Saghafian, hasan Effect of Austempering Treatment on Microstructure and Mechanical Properties of D6AC Steel [Volume 22, Issue 2, 2012]
  • SarPoolaky, hosin Study of the Influence of Chemical Composition on Miserite Formation in Glass Ceramic System SiO2-K2O-CaF2-CaO [Volume 22, Issue 2, 2012]
  • Shabestari, said Effects of Nitrogen and Vacuum Atmospheres and Addition of Tin on the Densification of Al-Cu-Mg pre-alloyed Powder During Supersolidus Liquid-Phase Sintering [Volume 22, Issue 2, 2012]
  • Shahmiri, mohamad A kinematical Dislocation Based Model and Admissible Velocity Field for rediction of Nanostructural Changes and Mechanical Properties of Al-Cu-Al Laminated Composite During ECAE Process [Volume 22, Issue 1, 2012]
  • Shahverdi, hamid reza Study of the Interface Reactions between Titanium Hydride Powder (TiH2) and Pure Aluminum Melt [Volume 22, Issue 1, 2012]
  • Shaykh Amiri, misam The Use of Eddy Current Nondestructive Test for the Quality Control of arburized Components [Volume 22, Issue 2, 2012]
  • Soltanieh, mansor Effect of Plasma Nitriding Temperature and Time on the Properties and Surface Morphology of H11 Hot Work Tool Steel [Volume 22, Issue 1, 2012]
  • Soltanieh, Mansor Formation of Chromium Carbide Layer on Carburized AISI 1020 Steel by Thermal Reactive Diffusion (TRD) Technique and Evaluation of its Kinetics [Volume 22, Issue 1, 2012]